Oil Rubbed Bronze Steel Hinge 3.5 X 5 1/4 Radius Corner. HOW TO INSTALL DOOR HINGES

Product Description
Bolton Oil Rubbed Bronze Steel Hinge 3.5 X 5 1/4 Radius Corner. This is an oil rubbed bronze door hinge in a US10B finish. It comes complete with matching screws and is easy to install. Oil rubbed bronze finishes have a dark elegant look and are an easy way to change the look of a door. They made with steel material. The pins are removeable for easy installation. Please use the diagram provided to help determine if a 1/4″ radius corner is what you need. Most doors require 3 hinges so order accordingly.

How to install hinges.
Step 1: Decide where you’d like to install the hinges. You can install hinges to make a door open to the left or the right.
Step2:
Mark the spots at which you want to install the hinges on the door frame. Most hinges are installed 10 inches from the door frame’s bottom and 5 inches from the top.
Step 3: Measure the same distance on the door itself and make corresponding marks.
Step 4: Trace the outline of the hinge onto the door frame using a pencil. Make clear delineations of the width and height of the hinge.
Step 5: Make marks for places in which you plan to place screws.
Step 6: Create a depression in which to insert a recessed hinge on the door frame. Use a hammer and chisel to score the area within the outline of the hinge.
Step 7: Screw the hinge in place. Avoid over-screwing the hinge.
Step 8: Repeat Steps 5 through 8 to attach the recessed hinge to your door.
Step 9: Connect the two halves of the hinges by reinserting the hinge pin. This will secure the door to the door frame.
Oil Rubbed Bronze Steel Hinge 3.5 X 5 1/4 Radius Corner. HOW TO INSTALL DOOR HINGES